User's Manual

4_OTS MANAGEMENT SOFTWARE OJMAR 91
4.15 PROGRAMMER TYPE
One programmer and one communications port can be predetermined so that
communications do not have to be established with the programmer whenever the
keys are to be used.
Access this screen via the “Communications / Programmer Type" menu or by
clicking on the following button on the main screen:
The main programmer type screen displays the following information:
1. Programmer type: Select between NFC or CNReader model.
2. COM port number: Select the communications port where the programmer is
connected.
 NOTE: See Section 4.17 for information on the communications port (COM) that is
connected to the programmer.
4.16 PC-PROGRAMMER
The OTS Software allows for the following firmware versions to be updated:
 The Ojmar programmer.
 The OTS RT locks.
 The OTS UN locks.
 NOTE: Firmware is a small software that is located in the memory of these devices
and that allows them to be initialised and used.
 WARNING: Only the Firmware supplied by Ojmar must be used.