Installation Guide

OK-9143H

ASSEMBLY INSTRUCTION

1.INDOOR USE ONLY

2.REPLACE THE BULB AFTER THE BULB GETS COOL

Assembly steps:

Step 1.Hang glass leaf(D) onto clip(A3) and

secure with pins(L)

Step 2.Mount the glass shade(B) to the spring

clip(A1) and Insert the bulb(C)

Step 3.Turn the tube(E) into the socket(A2)

and secure with loop(F).

Step 4.Loosen screw(I)and pass canopy (J)

over the tube(H).

Step 5.Tighten loop(K) on the tube(H).

Step 6.Pass the main wire through the links

of chain,loop(F1),canopy(J), tube(H)and

loop(K).

Step 7. Attach first link and last link(G)of

chain to the loops(F1) and (F)

step 8.Connect wire to the power supply

cord.

Step 9.Raise the canopy(J)to ceiling and

secure it by tightening the screw(I).

Step 10.Hang the Loop(K)on the hook on

ceiling.

After completed the above instruction, please check once more to ensure its safety. Then

you may turn the power on. If the external cable or cord is damaged, it shall be replaced

by the qualified person to avoid hazard.

PAGE 1
OK-9143H ASSEMBLY INSTRUCTION 1.INDOOR USE ONLY 2.REPLACE THE BULB AFTER THE BULB GETS COOL Assembly steps: Step 1.Hang glass leaf(D) onto clip(A3) and secure with pins(L) Step 2.Mount the glass shade(B) to the spring clip(A1) and Insert the bulb(C) Step 3.Turn the tube(E) into the socket(A2) and secure with loop(F). Step 4.Loosen screw(I)and pass canopy (J) over the tube(H). Step 5.Tighten loop(K) on the tube(H). Step 6.Pass the main wire through the links of chain,loop(F1),canopy(J), tube(H)and loop(K).