Operation Manual

Fill rinse aid dispenser

Your dishwasher is designed to use liquid rinse aids which are released during the nal rinse to

prevent water from forming droplets on your dishes.

1. Open the cap and pour the rinse aid into the dispenser until the level indicator turns completely

black. The volume of the rinse aid container is about 110 ml.

• To open the dispenser, turn the cap to the “open” (left) arrow and lift it out.

• Pour the rinse aid into the dispenser, being careful not to overll.

Indicator Status

Full

¾ full

½ full

¼ full

Empty

• Replace the cap by inserting it aligned with “open” arrow and turning it to the “closed” (right)

arrow.

Note: Never ll the rinse aid dispenser with any other substances (e.g. Dishwasher cleaning

agent, liquid detergent). This would damage the appliance.

2. Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and

streak free drying.

3. If the rinse aid dispenser is empty the rinse aid signal lamp will turn on red.

Adjust the rinse aid dispenser

The dosage can be adjusted in 6 levels. Default level is 4. This setting is a recommendation.

Note:

• Set the dosage level higher, if stains remain on the dishes.

• Set the dosage lower, if clouds or streaks remain on the dishes.

• Use a coin to change the setting.

IM_ODW60012_160118_V05_HR.indb 22 18/1/16 2:12 PM