Manualshelf

Operation Manual

ManualsBrandsOK ManualsAudioOKR 110
11121314151617181920
EN
12
Radio station search (manual): Press TUN-DN or TUN-UP to reduce/increase the
frequency by 0.1 MHz.
RDS:
When the product is tuned to a RDS station, the name of the station and RDS are
shown in the display.
The product's clock time is automatically synchronised if the station is transmitting a
time signal.
6
Setting the volume: Set the volume using the VOL+/– keys.
7
Saving radio station (manually): Tune in the desired station.
Press MEMORY (Display: and MEMORY are ashing).
Selecting memory number ( to ): Press ALARM 1 or ALARM 2. Conrm with
MEMORY.
Recalling saved radio stations: Press ALARM 1 or ALARM 2.
8
Saving radio station (automatically):
Press and hold MEMORY for approx. 3 seconds. All stations within range (max. 30) will
be saved automatically.
Recalling saved radio stations: Press ALARM 1 or ALARM 2 during radio operation.
9
Setting the time: In standby mode, press and hold CLOCK SET for approx. 2 seconds
(display: ).
Use TUN-UP or TUN-DN to choose 12 or 24 hour time display.
Conrm with CLOCK SET. The hours are ashing.
Set the hours with TUN-UP or TUN-DN. Conrm with CLOCK SET. The minutes are
ashing.
Set the minutes with TUN-UP or TUN-DN. Conrm with CLOCK SET.
10
Setting the alarm: In standby mode, press and hold ALARM 1 for approx. 2 seconds
(display: lights up. AL1 ashes).
Use TUN-UP or TUN-DN to choose the alarm signal:
• = FM radio
• = buzzer
Conrm with ALARM 1. The hours are ashing.
Set the hours with TUN-UP or TUN-DN. Conrm with ALARM 1. The minutes are
ashing.
Set the minutes with TUN-UP or TUN-DN. Conrm with ALARM 1 (display: current
time and AL1). The alarm has been set and activated successfully.
If desired, follow the steps above to set a seconds alarm time. To do so, use the
ALARM 2 key.
11
Activating/Deactivating alarm: In standby mode, press ALARM 1/2.
• AL1/2 lights up = alarm function activated
• AL1/2 goes o = alarm function deactivated
12
Snooze: When the alarm sounds, press SNOOZE. The alarm will sounds again
5minutes afterwards.
13
Switching o the alarm: When the alarm sounds, press ALARM 1/2.
14
Adjusting display brightness: Use DIMMER to select one of the 4 brightness levels.
OKR110_A6_131206 (1.3).indb 12 6/12/13 6:05 PM