Operation Manual

15
EN
COMPONENTS
Fold out front and rear page for product illustrations.
Front:
A. Handle
B. Applause button
C. POWER indicator
D. On/o, volume control (OFF –VOL+)
E. Cassette compartment door
F. Microphone volume control (–MIC VOL+)
G. Microphone
(one on each side of the appliance)
H. Microphone on/o switch
(for each microphone)
I. Recording indicator (REC)
J. Laughter button
K. Pause playback (PAUSE )
L. Stop playback/Eject cassette
(STOP/EJECT )
M. Fast forward (F.FWD )
N. Fast rewind (REW )
O. Playback (PLAY )
P. Recording (REC )
Q. Loudspeaker
R. Battery compartment
S. Headphone socket (PHONE)
T. Power socket for external transformer
(6 V 1 A )
POWER SUPPLY
1
Switch the appliance o by rotating the OFF –VOL+ control in a counter-clockwise direction until
a click sound is heard. Only then connect/disconnect the adaptor's power cable or remove/install
batteries.
2
Remove the battery compartment cover with a Phillips screwdriver.
3
Insert 4 batteries (type C / LR14, 1.5 V , not included) in the battery compartment. Match the
polarities + and –, as indicated on the batteries. Close the battery compartment cover.
or
4
Connect a suitable power adaptor (not included, see Technical data) to the power socket.
Connect the adaptor plug to a suitable electrical outlet.
TAPE CASSETTE PLAYBACK
5
Switching on: Rotate the OFF –VOL+ control in a clockwise direction. The POWER indicator lights
up. The music volume can be adjusted anytime using this control.
6
Press the STOP/EJECT button to open the cassette deck.
7
Insert a pre-recorded cassette inside the deck. Close the cassette deck.
8
Action Cassette buttons
Start playback PLAY
Pause playback PAUSE
Resume paused playback PAUSE
Fast rewind tape REW
Fast forward tape F.FWD
Stop playback STOP/EJECT (1x)
Eject cassette STOP/EJECT (2x)
IM_OPC200CA_140718_V05.indb 15 18/7/14 7:38 PM