Operation Manual

15
EN
COMPONENTS
Fold out front and rear page for product illustrations.
1. Telescopic antenna
2. Handle
3. CD compartment door
4. AUX-IN socket
5. OPEN/CLOSE CD compartment door
6. REP button
7.
button
8. button
9. POWER indicator
10. Loudspeaker
11. button
12. / button
13. PROG button
14. Display
15. Repeat indicator
16. Play/Pause indicator
17. FM stereo indicator FM ST.
18. TUNING knob
19. Band selector FM.ST • FM • AM
20. AC socket
21. Function switch AUX • CD • RADIO
22. VOLUME control
23. Battery compartment
24. Power cable with power plug
POWER SUPPLY
1
Connect the power cable to the AC socket.
2
Connect the power plug to a suitable electrical outlet.
or
3
Remove the battery compartment cover.
4
Insert 6 batteries (type C / LR14, 1.5 V
, not included) in the battery compartment. Match the
polarities + and –, as indicated on the batteries.
5
Close the battery compartment cover.
Note: Switch the appliance o by pressing the
/ button for approx. 2 seconds before plugging/
unplugging the power cable or removing/installing batteries.
RADIO MODE
6
Switching on the appliance: Press and hold the
/ button for approx. 2 seconds. Power
indicator lights up.
Set the function switch to the RADIO position.
7
Selecting radio band: Use the band selector FM.ST • FM • AM. Select FM for mono stations and
FM.ST for stereo stations. In case stereo station is found: FM ST. stereo indicator lights up.
8
Selecting desired radio station: Use the TUNING knob.
Notes:
• For better FM reception: Fully extend the antenna.
• For better AM reception: Reposition the appliance.
• FM radio stations with weak signal or too much "noise": Set the band selector to the FM position.
IM_ORC110_140605_V03.indb 15 6/5/14 11:15 AM