Operation Manual
BEFORE OPERATION
ASSEMBL
Y
Place the mat on top of the platter.
Remove the tie securing the tonearm.
Remove the stylus guard.
CONNECTIONS
1
3
2
Before connecting the unit it is advised that you also
consult your current equipment instruction manual.
Note: Be sure to turn o the equipment before you make
changes to the dierent connections.
1. Connect the power cord to an AC outlet.
2. Connect the RCA cable to the PHONO input of your
AMPLIFIER.
Output terminals Amplier(Receiver)
L (White) L Channel
R (Red) R Channel
NOTE: You can also use a line input by setting the phono
/ line switch at the rear of the turntable to line.
3. Connect PC via USB cord.
PC
Set the PHONO/LINE
switch to “LINE”.
Set the PHONO/LINE
switch to “PHONO”.
36