Operation Manual

26
ENGLISH
GB
Read and understand the
operating instructions before using
the appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
In case of any doubts about connection and operati-
on refer please to our customer center
Speci ed Conditions Of Use
This power unit has solely been designed for the
operation of electrical equipment with a maximum
power within the power unit performance data.
Higher starting current of induction appliances must
be considered.
The unit has been designed for operation of common
e ective and induction appliances such as light
chains, electric hand tools (drills, electric chain saws,
compressors).
Technical Data
Electric generator GSE 3700 RS GSE 6700
Art. No .........................................................................................05260 ....................................... 05243
Service connection ................................... 2 x 230 V ~ 50 Hz ..................2 x 230 V ~ 50 Hz
1 x 400 V ( CEE 16 A )
Rated current ................................................................... 10 A ...................................... 19,6 A
7,2 A

Constant power .....................................2500 W / 3000 VA .....230 V 4500 W / 5300 VA
400 V 5000 W / 5900 VA

Rated power ............................................2800 W / 3300 VA .....230 V 5000 W / 5900 VA
400 V 5500 W / 6500 VA
Power class ..........................................................................G 1 ............................................. G 1
Power factor ........................................................................ 0,9 ........................................... 0,85
Contents .....................................................................207 ccm ...................................389 ccm
Engine type ..........................................1-cylinder 4-stroke .............. 1-cylinder 4-stroke
Motor output ............................................... 4,8 kW / 6,5 PS ........................9,5 kW / 13 PS
Rated speed.......................................................... 3180 min
-1
............................... 3180 min
-1
tank capacity (Petrol) ...................................................... 12 l .............................................25 l
Consumption at half load .........................................1,3 l/h ....................................... 3,3 l/h
Oil amount .........................................................................0,6 l .............................................1,1l
Weight ...........................................................................41,5 kg ..................................... 84,6 kg
Dimensions L x B x H ...................... 570 x 435 x 525 mm ............720 x 530 x 655 mm
Degree of protection ...............................................IP 23 M ..................................... IP 23 M
Noise and Vibration Information
Sound pressure level L
PA
........................................... 74,26 dB (A) ............................76,00 dB (A)
Uncertainty K = ...............................................................1,55 dB (A) .............................. 0,40 dB (A)
Measured sound power level L
WA
1)
......................95,81 dB (A) ............................ 95,43 dB (A)
Guaranteed sound power level L
WA
1)
........................96 dB (A) ....................................... 96 dB (A)
Wear ear protectors!
Measured according to
1)
2000/14/EG
When connected to a stationary device such
as heating, electrical power, air conditioning
equipment or for the supply of mobile homes, it
is necessary to contact a professional electrician
and heating manufacturer as far as connection
and grounding is concerned.
Not observing general regulations in force and
instructions from this manual does not make the
manufacturer liable for damages.
Protective equipment „Protective separation with
potential balancing“ is provided and integrated by
the producer.
Connection, installation and
operation

AVR
Automatic voltage control makes sure the
unit voltage  uctuation is within the values
guaranteed by the power plant.