User's Manual

Loop Controller / Alarm TriggerIT-200 IR Trigger
Optional
5
6
1
2
3 4
1
2
3
4
5
6
Pow e r indicator
Pow e r switches (DIP)
and power mode setup
Hanging hole
Track number setup
Battery door
DC input socket
Operation
Pow er On
1
2
Any DIP switch moves to ON position will turn this device on. Pow e r indicator
will light up for 2 seconds and then off. Indicator will blink eve ry 2 seconds when
device is working.
Pow er OFF
When all DIP switches move to OFF (downward)
position, the device will be
turned off.
2
Track Number Setting
Tracking number is set by rota ry switches, from left hand side to right hand
side. Ev e r y single IR trigger ca n activate one tracking number only. An exam pl e
(1996) is shown as below.
4