User Manual
Table Of Contents
- Table of contents
- Before starting
- Setup
- Connecting to a Computer
- Connection Method and Flow
- Product Requirements
- Types of Drivers
- Connecting to a Wireless LAN
- Connecting a USB Cable
- Connecting a LAN Cable
- Installing a Printer Driver to a Computer
- Selecting a connecting method between different segments
- Energy Saving Function
- Troubleshooting
- When an Error Message Appears on the Display Screen (When the ATTENTION Indicator Lights Up/Blinks)
- Error Messages
- When Paper Jams Occur
- Other Issues
- Unable to Print from a Computer
- Unable to Install a Printer Driver Successfully
- Image Quality Issues
- Vertical White Lines Appear
- Printed Images are Fading Vertically
- Printed Images are Light
- White Spots and Lines Appear
- Dew Condensation Appears on Printed Paper
- Vertical Lines Appear
- Horizontal Lines and Spots Appear Periodically
- White Area on Paper is Lightly Stained
- The Periphery of Characters is Smudged
- The Entire Paper Area is Lightly Stained When Printing on Envelopes or Coated Paper
- Toner Comes Off When Printed Paper is Rubbed
- Uneven Gloss
- Black or White Dots Appear
- Dirt is Printed
- The Entire Page is Printed Black
- Nothing is Printed
- White Patches Appear
- Color of the printed image is not what you expect
- Feeding Issues
- Problems on the Machine
- Maintenance
- Appendix
- Menu Map
- Contact Us
- 147 -
7. Maintenance
12
Close the MP tray.
If the MP tray cannot be closed, press the paper setting part of the MP tray downward
to put the paper set cover back in place.
Clean the resist rollers in the following steps when they are dirty.
1
Open the front cover.
2
Wipe the metal part (1) and (2) of the resist roller which can be seen in front
with a soft tissue paper.
• When cleaning the metal part (2), do not touch the rubber roller which contacts the metal part (2).
3
Turn the metal parts downwards and wipe them until they get clean.
4
Close the front cover.
Cleaning the Resist Roller