Owner manual

ManualsBrandsOki ManualsPrinters7300

C7100/7300/C7500

Duplexer

Installation Instructions

Duplexer Part Number: 70040401

58364601

Phase 1 - Install

If you will be using the duplex

unit to print complicated files

with graphics, you need to pur-

chase and install 64 MB additional

printer memory (OKI # 70041001).

1. Unpack the duplex unit and remove

any shipping materials.

2. Turn off the printer, then open the

front cover.

3. Locate the slides inside the printer.

4. Place the duplex unit guide rails on

the slides, then push the duplex unit

all the way into the printer.

5. Close the front cover.

6. Turn on the printer.

Phase 2 - Activate the Duplex

Unit in the Driver

WINDOWS® PCL DRIVER

1. Click Start — Settings —

Printers

. The Printers dialog box

opens.

2. Right-click the OKI C7100, C7300

or C7500 PCL printer icon, then

click

Printing Preferences

(Windows 2000),

Properties

(Windows XP, Me, 98, 95) or

Document Defaults (Windows

NT 4.0).

3. On the

Paper tab, click Device

options. Or, with Windows XP,

select the

Device Option tab.

4. Click

Duplex option unit to select

it, then click

OK.

5. Click

OK, then close the Printers

dialog box.

WINDOWS POSTSCRIPT® DRIVER

1. Click Start — Settings —

Printers

. The Printers dialog box

opens.

2. Right-click the OKI C7100, C7300

or C7500 PostScript printer icon,

then click

Properties.

3. Change the setting:

WINDOWS XP, 2000 AND NT 4.0:

a. Click the

Device Settings tab.

b. Scroll down to

Installable

Options

and click Duplex.

c. Under

Change ‘Duplex’ Set-

ting

, click Installed.

INDOWS ME, 98 AND 95:

a. Click the

Device Options tab.

b. Click

Duplex.

c. Under

Change setting for:

Duplex, click Installed.

4. Click OK, then close the Printers

dialog box.

MACINTOSH® DRIVER (OSX)

1. As of OS 10.1.5, Apple has not

enabled Printer Options

adjustment. Therefore, this

selection is unavailable.

MACINTOSH® DRIVER (CLASSIC)

1. Activate Chooser from the Apple

menu.

2. Select

LaserWriter 8.

3. Click

Printer — Setup.

4. Click

Configure.

5. Change the

Duplex setting to

Installed.

6. Click

OK twice.

7. Close

Chooser.

Summary of content (2 pages)

PAGE 1
C7100/7300/C7500 Duplexer Installation Instructions Duplexer Part Number: 70040401 Phase 1 - Install 5. Close the front cover. ! If you will be using the duplex unit to print complicated files with graphics, you need to purchase and install 64 MB additional printer memory (OKI # 70041001). 1. Unpack the duplex unit and remove any shipping materials. 2. Turn off the printer, then open the front cover. 6. Turn on the printer. Phase 2 - Activate the Duplex Unit in the Driver WINDOWS® PCL DRIVER 3.
PAGE 2
Continued Limited Warranty: United States Oki Data Americas, Inc. (Oki Data) warrants this OPTION to be free from defect in material and workmanship and will remedy any such defect according to the terms of this Oki Data will repair (or at its option, replace) at no charge, any defective part(s) of the OPTION for one (1) year from the date of purchase. This Limited Warranty extends to the original purchaser only.