Operation Manual

User’s Guide
11
STEP 6: LOADING THE UNIVERSAL PAPER TRAY
The 550-sheet universal paper tray that sits inside the printer can accommodate paper sizes
from postcard to legal. The 550-sheet universal paper tray has two width guides that are
located on the sides of the tray, and one length guide that is located near the center of the
tray. These guides allow you to adjust the size of the area that holds paper.
NOTE
The following procedure shows you how to load paper into the main paper tray. To load
paper into the optional 550 sheet paper feeder, simply complete the procedure using the
550 sheet paper tray and feeder rather than the main paper tray.
Use the following procedure to load paper into the 550 sheet universal paper tray:
1. Place the paper tray on a level surface.
2. Squeeze the locking mechanism on the rear length guide, lift it up, and slide it all the way
to the rear of the tray.
3. If the paper you are using is longer than A4 (11.7 inches/ 297 mm), press the square
green button on the bottom of the paper tray to release the rear of the tray, and pull the
tray out to extend it. This is known as the extended position.