Operation Manual

User’s Guide

STEP 10: CONNECTING THE PRINTER TO HOST COMPUTER

You must connect the printer to your computer using an IEEE 1284 parallel cable or a USB

cable. These cables are user-supplied. The printer does not include either of these cables.

The default configuration of your printer has the USB port turned off.

If you would like to use the USB port instead of the parallel port, use the following procedure

to turn the USB port on.

1. Press the MENU button on the control panel.

2. Press the NEXT button until the text “Interface Menu” is shown on the second line of the

display.

3. Press the SELECT button to enter the interface menu.

4. Press the NEXT button until the text “Port” is shown on the second line of the display.

5. Press the SELECT button to enter the port submenu.

6. Press the NEXT button until the text “USB” is shown on the second line of the display.

7. Press the SELECT button to enter the USB submenu.

8. Press the NEXT button until the text “On” is shown on the second line of the display.

9. Press the SELECT button to change the USB setting to “On”.

10. Press the START/STOP button to exit the menu system.

NOTE

For more information about USB settings, please refer to the Technical Reference Guide

included on the CD-ROM.