Operation Manual

INSTALLATION PROCEDURE
ABOUT THE INSTALLATION PROCEDURE
This section guides you through the process of setting up and installing the printer. Complete
the entire installation procedure to ensure a proper installation.
SAFETY PRECAUTIONS
This printer is available in either of the following power specifications: 110V and 220V. The
specifications that apply to your printer depend on your machine configuration. To prevent
fire or shock hazards, connect the power plug only to a properly rated power outlet.
HANDLING THE PRINTER
Follow the guidelines below when lifting or moving the printer:
> The printer is very heavy, and should always be lifted by two people. The weight of the
printer without paper tray, toner cartridge, and paper is about 51 lbs (23 kg). Never
attempt to lift the printer alone.
> To lift the printer, have two individuals facing each other from the front and the rear of the
printer grasp the recessed areas on each side of the printer. Do not lift the printer by
grasping any area other than these recessed areas.
> When lifting the printer, maintain proper lifting posture to prevent injuries.