Operation Manual

INSTALLATION AND RELOCATION PROCEDURE > 12
PREPARING A LOCATION FOR THE PRINTER
Place the machine on a level and sturdy surface that can withstand the
machine weight – 20.4 kg (45lb) (B6200) or 22.6 kg (50lb) (B6300). If
tilted, the machine may fall over and cause injuries.
SPACE REQUIREMENTS
The printer has ventilation holes on the side and rear panels. Ensure
that the printer is installed with a minimum clearance of 255mm
(10in) from the rear vent to any wall, 200mm (8in) from the left vent to
any wall, and 300mm (12in) from the right vent to any wall. A poorly
ventilated machine can cause excessive internal heat and fire. The
following diagram shows the minimum clearances required for
normal operation, consumables replacement, and maintenance to
ensure your machine operates at peak performance.
* B6200
ENVIRONMENT
Ensure that the installation location meets the following conditions:
l Do not place the printer in a hot, humid, dusty or poorly
ventilated environment. Prolonged exposure to such adverse
conditions can result in fire or electric shock.
255 mm
300 mm
200 mm
513.2
mm
402 mm
465.4 mm
(454.6 mm)*