Operation Manual

INSTALLATION AND RELOCATION PROCEDURE > 37
3.
Place the drum-toner cartridge on a flat surface and pull out
the seal horizontally.
4.
Hold the drum-toner cartridge by the grip and insert it into the
slot inside the printer.
5.
Close the cover securely.
CAUTION!
When pulling out the seal, pull it out horizontally. The tape might
break if it is pulled out diagonally.
After the seal has been pulled out, do not shake or bump the drum-
toner cartridge.
CAUTION!
Do not touch any parts inside the printer.
Ensure that the drum-toner cartridge is firmly located.
NOTE
If the offset catch tray is folded as in Step 1, close the cover and then
return the tray to its original position.