Operation Manual

INSTALLATION AND RELOCATION PROCEDURE > 48
INSTALLING THE PRINTER DRIVER
To print from the computer, install the printer driver and other
required software.
The installation procedure(s) you will use for your printer vary
according to operating system, usage of the USB port, and network
connection.
A brief outline of installing drivers on Windows and Macintosh
operating systems is given below. Solaris, Linux and HP-UX are dealt
with in other parts of your documentation.
MICROSOFT WINDOWS SYSTEMS
1.
With Windows running, insert the CD-ROM into your CD-ROM
drive.
2.
If the CD-ROM does not run automatically, use [Start – Run...]
and enter E:\setup (where E is your CD-ROM drive) in the Open
field.
3.
Click on OK.
4.
Click on [Driver Installation] and then [Install Printer Driver]
and follow the on-screen prompts to complete your printer
driver installation.
APPLE MAC OS 8X, 9X (USB)
1.
Ensure that the printer and the host computer are powered on.
2.
Ensure that the “Apple LaserWriter Software” is installed.
3.
Attach the USB cable to the host computer and the printer.
4.
Open the [Desktop Printer Utility] (installed when you installed
the Apple LaserWriter Software).
NOTE
The printer is considered a “self-powered” device and as such may be
plugged into any available USB port on the Macintosh, including the
one on the keyboard.