Extra Information

- 132 -
Changing Network Settings From the Web Page
4
4. Network Settings
g Select [Authenticate Server] and
then click [Import].
h Enter the le name of the CA
certicate and then click [OK].
i Specify the certicate issued by
the certicate authority, which is
the certicate authority from which
the RADIUS server obtained the
certicate. A PEM, DER, and PKCS#7
le can be imported.
j Click [Send].
k When the main unit comes online,
proceed to “Wireless LAN settings”.
Note
● When [WPA-EAP] or [WPA2-EAP] is set for the
security method and [EAP-TLS] is selected as the
[EAP Type], [Not authenticate Server] cannot be
selected.
Using PEAP:
a Select [Disable] for [IEEE802.1X].
b Select [PEAP] for the [EAP Type].
c Enter a user name in [EAP User].
d Enter the password in [EAP
Password].
e Select [Authenticate Server] and
then click [Import].
f Enter the le name of the CA
certicate and then click [OK].
g Specify the certicate issued by
the certicate authority, which is
the certicate authority from which
the RADIUS server obtained the
certicate. A PEM, DER, and PKCS#7
le can be imported.
h Click [Send].
i When the main unit comes online,
proceed to “Wireless LAN settings”.
 Wireless LAN settings
1 Log in as the administrator.
2 Click the [Network Setup] tab.
3 Click the [Wireless setting] > [Manual
Setup] menu.
4 In the [Basic Settings] eld under
[Network Connection], select
[Wireless].
Memo
● The default is “Wired”.
5 Enter the SSID name of the wireless AP
that you want to connect to in [SSID].
6 In the [Security method], select the
same security setting as the wireless AP
that you want to connect to.
Depending on the selected security
method, congure one of the settings
from (1) to (3) below.
When [Disable] is selected, press the
[Submit] button at the bottom left of
the Web screen. (Not recommended for
security reasons.)
Memo
● The default is “Disable”.
(1) When WEP is selected:
a When [WEP] is selected, [WEP
KEY] is displayed.
Enter the same KEY as the WEP KEY
set for the wireless AP that you want
to connect to.
Note
● There is not setting for the WEP KEY index. The WEP
KEY index communications with the wireless AP as 1.
Memo
● After entering the KEY, the key is displayed as “*”
symbols for security reasons.
(2) When WPA-PSK or WPA2-PSK is
selected: