Extra Information

- 133 -
Changing Network Settings From the Web Page
4
4. Network Settings
a When [WPA-PSK] or [WPA2-PSK]
is selected, [Encryption type] and
[Pre Shared Key] are displayed.
b In [Encryption type], select the
encryption type (TKIP or AES) set
in the wireless AP that you want to
connect to.
Memo
● The default is “TKIP”.
● Depending on the model of wireless AP, the mixed
TKIP/AES may be supported. In this case, we
recommend using AES.
c In [Pre Shared Key], enter the
same KEY as the Pre Shared KEY set
for the wireless AP that you want to
connect to.
Memo
● After entering the KEY, the key is displayed as “*”
symbols for security reasons.
(3) When WPA-EAP or WPA2-EAP is
selected:
a When [WPA-EAP] or [WPA2-EAP]
is selected, [Encryption type] is
displayed.
b In [Encryption type], select the
encryption type (TKIP or AES) set
in the wireless AP that you want to
connect to.
7 When all of the settings for basic
settings and security settings are
completed, press the [Submit] button
at the bottom left of the Web screen,
and the settings are reected. It may
take up to a minute to connect to the
wireless AP. If the connection fails,
either recongure the wireless settings
from the operation panel, or switch to
wired LAN from the operation panel, and
recongure the wireless settings from
the Web.