Extra Information

- 66 -
List of Setup Menu
2
2. Changing Printer Settings
Item Value
Factory
Default
Descriptions
Network Setup Factory Defaults? Execute Species whether to
initialize the network
menu or not.
Parallel Setup
(When Parallel
I/F is installed.)
Parallel Enable
Disable
* Sets Enable/Disable of
Parallel I/F.
Bi-Direction Enable
Disable
* Sets Enable/Disable of bi-
directional Parallel.
ECP Enable
Disable
* Sets Enable/Disable of ECP
mode.
Ack Width Narrow
Medium
Wide
* Sets ACK width for
compatible reception.
Ack/Busy Timing Ack in Busy
Ack while Busy
* Sets the order to output
the BUSY signal and the
ACK signal for compatible
reception.
I-Prime 3 microseconds
50 microseconds
Disable *
Sets time to enable/
disable the I-PRIME signal.
Ofine Receive Enable
Disable *
Sets Enable/Disable of
a function that keeps
receive-possible state
without changing an I/F
signal even though an
alarm occurs.
USB Setup USB Enable
Disable
* Sets able/disable of USB
I/F.
Speed 480Mbps
12Mbps
* Sets of the max. USB I/F
transfer speed.
Soft Reset Enable
Disable *
Sets Enable/Disable of
Soft Reset command.
Serial Number Enable
Disable
* Species Enable/Disable of
a USB serial number.
Ofine Receive Enable
Disable *
Sets Enable/Disable of
a function that keeps
receive-possible state
without changing I/F
signal even though an
alarm occurs.
USB Memory Interface Enable
Disable
* Sets able/disable of USB
memory I/F.
Print Setup
Personality Auto
PCL
XPS
IBM PPR
EPSON FX
PostScript
* Selects a printer language.
Copies 1
―
999
* Sets the number of copies.
Duplex On
Off *
Species Duplex Print.
Binding Long Edge
Short Edge
* Species Binding in Duplex
Printing.