Operation Manual

Printing > 22
P RINTING ON LABELS
Labels can be printed from all trays.
L OADING AND PRINTING ON LABELS
Before loading the labels in the tray, consider the following points:
> Do not use vinyl labels.
> Do not use any labels on a sheet where items are missing; it may damage the
printer.
> Print only on one side of the sheet of labels.
> Ensure that the labels are stored in a cool dry place and in their original packaging.
Storing them in extreme conditions can cause jams, curls or poor print quality.
1. Insert the labels in the tray, with the following considerations:
> Trays 1-4 - Insert the label sheets long-edge feed and face up. Place the top of
the page toward the front of the paper.
> MPF Tray 5 - Insert the label sheets long-edge feed and face down. Place the top
of the page toward the front of the printer.
> HCF Tray 6 - Insert the label sheets long-edge feed and face down. Place the top
of the page toward the front of the printer.
2. Adjust the paper guides to fit the size of the label sheets.
3. On the control panel, change the paper type to LABELS.
4. From the File menu, select Print.
5. Select this printer as the printer to be used and click Properties.
6. Click the Media Type drop down box and click on labels.
7. Click the Paper Size drop down.
8. From Paper Size select the size of the original document.
9. Click OK.
10. Click Print in the Print dialog box to start printing.
Trays 1-4 Multi Purpose Feeder Tray 5 High Capacity Feeder Tray 6