Operation Manual

Printing > 23
P RINTING ON CUSTOM SIZE PAPER
This section explains how to print on custom size paper. You can print custom size paper
from Trays 1-5. Tray 6 (HCF) can only print standard paper.
The paper sizes that can be set on this printer are as follows:
L OADING AND PRINTING ON CUSTOM SIZE PAPER
1. From the File menu, click Print.
2. Select Properties then select the Setup tab.
3. Select Option as needed: Source, Media Type, etc.
4. You may select a previously stored custom size from the list or you may add an
additional custom size.
5. To add a new custom size:
(a) Select paper feed options.
(b) Select Custom Size.
(c) In the Name Field, Type a name for your custom size.
(d) Click on the Unit of measure radio button for the units you would like to use
(mm for millimetres or inch for inches.)
(e) In the Width field, enter the width of the custom size paper.
(f) In the Length field, enter the length of the custom size paper.
(g) Click add to store the new custom size.
(h) Click OK to close the Dialog Box.
INPUT TRAY OUTPUT TRAY
TRAY 5 TRAYS 1-4 STANDARD STACKER
UPPER
STACKER
LOWER
WIDTH 89 - 297mm
(3.5 - 11.70 in)
140 - 297mm
(5.5 - 11.70in)
89 - 297mm
(3.5 - 11.70in)
203 - 297mm
(7.9 - 11.70in)
203 - 297mm
(7.9 - 11.70in)
HEIGHT 98 - 432mm
(3.87 - 17in)
182 - 297mm
(7.16 - 11.70in)
98 - 432mm
(3.87- 17.0 in)
182 - 432mm
(7.16 - 17.0 in)
182 - 432mm
(7.16 - 17.0 in)
CAUTION!
When setting the paper size on the printer driver and the control
panel, specify the size of the actual paper used. Setting the wrong
size for printing will cause jam detection. This is especially true if
you configure a bigger size when using a narrow width paper.
NOTE
> You may use the Modify selection to change a previously stored custom
size.
> You may use the Delete selection to delete a previously stored custom
size.