Operation Manual

Troubleshooting > 47
P APER JAM IN MULTI PURPOSE FEEDER ( TRAY 5)
To clear paper jam in Multi Purpose Feeder (MPF) tray, do the following:
1. Verify if the width guides are aligned with the paper.
2. Open cover A and remove any jammed paper. If required, press the green lever to
move the paper to make it easier to remove. Ensure that all paper fragments are
removed.
3. Close cover A.
P APER JAM IN HIGH CAPACITY FEEDER ( TRAY 6)/ TWO TANDEM TRAYS
1. Pull out the High Capacity Feeder (tray 6) or trays 3 and 4 (TTM).
2. Verify if the length and width guides are set correctly.
NOTE
Check if the paper size set on the paper tray matches the size displayed on
the Control Panel. If they match, press the Select button. If the paper size
does not match, then change it in the control panel to match.