Printer User Manual
Table Of Contents
- Copyright Information
- Contents
- Notes, Cautions, etc.
- Introduction
- Parts of the Printer
- Paper (Print Media)
- Paper Trays
- Paper Exit Paths
- Loading Paper
- Consumables and Replacement Supplies
- Printer Settings (Menu Settings)
- Options
- Specifications
- Troubleshooting
- General Information
- Display Panel Messages
- Paper Jams
- Print Quality Problems
- USB Problems
- Application error
- General Protection Fault
- Paper Size Change Request
- Printer does not go online
- Printer makes a strange noise
- Printer takes a long time to start printing
- Printing cancels
- Printing does not start
- Printing is slow
- Cleaning Page
- Printer Drivers
- Printer Features
- Overview
- Banners
- Black Finish
- Black Overprint
- Black Printing
- Booklets (Binding Print)
- Collating
- Color Matching
- Overview
- Basics
- What this guide describes
- Background Information
- Factors that Affect Color Printing
- Choosing a Color Matching Method
- Color Settings
- Hue, Brightness, and Saturation
- How To
- Color Match Precision
- List of Color Matching Methods
- Descriptions of Color Matching Methods
- Automatic
- Office Color
- No Color Matching
- Grayscale
- Color Synch
- Custom Page Sizes
- Duplex Printing
- (Printing on Both Sides of the Paper)
- General Information
- Paper Types
- Paper Weights
- Paper Sizes
- Long Edge vs. Short Edge
- Duplexing Restrictions
- Windows PostScript: All Print Jobs (Default)
- Windows PostScript: Single Job
- Windows PCL: All Print Jobs (Default)
- Windows PCL: Single Print Job
- Macintosh OS 9.x
- Macintosh OS 10.1 & 10.2
- Macintosh OS 10.3
- Grayscale
- N-Up Printing
- Photographs
- Posters
- Print Resolution
- Save as File
- Toner Saving
- Watermarks
- Utilities
- Overview
- Accessing
- Descriptions of Utilities
- Installing the Utilities
- Color Correction Utility
- Color Swatch Utility
- Direct Network Printing Utility (LPR)
- Display Language Utility
- Network Printer Status Utility
- Network Setup Utility
- PS Gamma Adjuster Utility
C6000n User’s Guide
103
MPT PAPERSIZE LETTER, EXECUTIVE,
LEGAL14, LEGAL13.5,
LEGAL13, A4, A5, A6,
B5, CUSTOM, COM-9
ENVELOPE, COM-10
ENVELOPE, MONARCH
ENV, DL ENVELOPE,
C5 ENVELOPE
Defines the size of paper to
be fed from the Multi-Purpose
Tray.
MPT PAPERTYPE PLAIN, LETTERHEAD,
TRANSPARENCY,
LABELS, BOND,
RECYCLED, CARD
STOCK, ROUGH
Defines the type of media to
be fed from the Multi-Purpose
Tray so that the printer can
adjust its internal parameters
for the media.
MPT MEDIAWEIGHT MEDIUM, HEAVY,
ULTRA HEAVY
Adjusts the printer for the
weight of paper stock loaded
in the tray. See “Driver
Settings” on page 11.
If the Ultra Heavy setting
does not give proper toner
fusion, you can try the Label
settings.
UNIT OF MEASURE MILLIMETER
INCH
Defines the unit of measure
for the next two items.
X-DIMENSION 3 to 8.5 INCH
Default = 8.5 INCH
Defines the width of paper
defined by the “CUSTOM”
settings.
Y-DIMENSION 5 to 35.5 INCH
Default = 11 INCH
Defines the length of paper
defined by the “Custom”
settings. Note that media of
up to 47'' (1.2 m) in length
can be fed one sheet at a
time from the Multi-Purpose
Tray- for banner printing.
Item Settings Explanation