Printer User Manual
Table Of Contents
- Copyright Information
- Contents
- Notes, Cautions, etc.
- Introduction
- Parts of the Printer
- Paper (Print Media)
- Paper Trays
- Paper Exit Paths
- Loading Paper
- Consumables and Replacement Supplies
- Printer Settings (Menu Settings)
- Options
- Specifications
- Troubleshooting
- General Information
- Display Panel Messages
- Paper Jams
- Print Quality Problems
- USB Problems
- Application error
- General Protection Fault
- Paper Size Change Request
- Printer does not go online
- Printer makes a strange noise
- Printer takes a long time to start printing
- Printing cancels
- Printing does not start
- Printing is slow
- Cleaning Page
- Printer Drivers
- Printer Features
- Overview
- Banners
- Black Finish
- Black Overprint
- Black Printing
- Booklets (Binding Print)
- Collating
- Color Matching
- Overview
- Basics
- What this guide describes
- Background Information
- Factors that Affect Color Printing
- Choosing a Color Matching Method
- Color Settings
- Hue, Brightness, and Saturation
- How To
- Color Match Precision
- List of Color Matching Methods
- Descriptions of Color Matching Methods
- Automatic
- Office Color
- No Color Matching
- Grayscale
- Color Synch
- Custom Page Sizes
- Duplex Printing
- (Printing on Both Sides of the Paper)
- General Information
- Paper Types
- Paper Weights
- Paper Sizes
- Long Edge vs. Short Edge
- Duplexing Restrictions
- Windows PostScript: All Print Jobs (Default)
- Windows PostScript: Single Job
- Windows PCL: All Print Jobs (Default)
- Windows PCL: Single Print Job
- Macintosh OS 9.x
- Macintosh OS 10.1 & 10.2
- Macintosh OS 10.3
- Grayscale
- N-Up Printing
- Photographs
- Posters
- Print Resolution
- Save as File
- Toner Saving
- Watermarks
- Utilities
- Overview
- Accessing
- Descriptions of Utilities
- Installing the Utilities
- Color Correction Utility
- Color Swatch Utility
- Direct Network Printing Utility (LPR)
- Display Language Utility
- Network Printer Status Utility
- Network Setup Utility
- PS Gamma Adjuster Utility
C6000n User’s Guide
125
CHECK FUSER
320: FUSER MISSING
The fuser unit is not
properly installed.
Open the top cover
and check to be sure
that the fuser unit is
properly seated in the
printer and that the
lock levers are pushed
all the way toward the
back of the printer:
c53_61a_fuser3.jpg
CHECK MP TRAY
390: PAPER JAM
Paper has jammed
while exiting the MP
Tray.
Clear the jam. See
“Jam 390”, on
page 145.
CLOSE COVER
316: DUPLEX COVER OPEN
The duplex cover is
open or not properly
latched.
Close the duplex
cover:
c53_95_duplexjam
_Crop.jpg
CLOSE COVER
nnn: COVER OPEN
Either the top cover
or the front cover is
open.
Be sure both the top
cover and the front
cover are firmly
closed.
INSTALL PAPER CASSETTE
430: TRAY 1 MISSING
Tray 1 is not
installed in the
printer.
Install the missing
tray.
INSTALL PAPER CASSETTE
440: TRAY 1 OPEN
Tray 1 is not
properly installed in
the printer.
Make sure the tray is
pushed fully into the
printer.
Message Meaning What to Do