Operation Manual

Status, Error, and Service Messages 8-31
Error Messages (Warning)
PROCESSING
The printer is processing
data.
No action needed.
Oki C130
STARTING PRINTER
The printer is being started
up.
PORT AUTH ACTIVE
The IEEE802.1x port is
being authorized.
WARMING UP
The printer is warming up.
This message... means... do this...
CHECK TRAY1
PAPER
(Displaying alternately)
PRESS
ENTER
Tray 1 is empty. Load the media into
Tray 1, and then press
the ENTER key.
Media has misfed in
Tray 1.
Remove the misfed
media.
I/C END
The imaging cartridge
has reached the end
of its life.
Replace the imaging
cartridge.
I/C LIFE END
I/C LOW
The imaging cartridge
is near the end of its
life.
Prepare a new imaging
cartridge.
TRAY 2 IS EMPTY
Tray 2 is empty. Load the media into
Tray 2.
TRAY 2 OPEN
Tray 2 cassette is not
installed or is not fully
closed.
Close Tray 2 or print
from another tray.
VIDEO I/F ERROR
A video interface
error occurred in the
printer.
Turn off the printer. After
a few seconds, turn on
the printer.
X INCORRECT
The X toner cartridge
is an unapproved
type.
Install a genuine Oki
toner cartridge of the
appropriate type.
X MEMORY ERROR
A memory error
occurred in the toner
cartridge.
Re-install the specified
toner cartridge.
This message... means... do this...