Operation Manual

Status, Error, and Service Messages8-32
Error Messages (Operator Call)
X TONER LOW
The X toner cartridge
is nearly empty.
Prepare the specified
color toner cartridge.
X TONER OUT
(Ready Indicator: On.
Attention Indicator: Off)
The X toner cartridge
is empty.
Replace the toner car-
tridge.
" Printing can
continue,
however, the
printing results
are not
guaranteed.
This
message...
means... do this...
AUTH
TIMEOUT
The user is automatically
logged off due to IEEE802.1x
port authorization.
Reauthorize the IEEE802.1x
port, and then log on.
AIDC
ERROR
AIDC sensor error. Open and close front cover
to automatically clean AIDC
parts.
BELT
ERROR
The printer detected incorrect
image position on the image
transfer belt.
Check the cyan and black
toner cartridges and replace
them if they have run out.
If the error has not been
recovered by this proce-
dure, please call Technical
Support.
DUPLEX
UNIT
PANEL
OPEN
Duplex cover is open. Close the duplex cover.
ERROR
LOADING
IMAGE
While updating code, an error
has occurred.
The user should attempt the
upgrade process again.
This message... means... do this...