Operation Manual

Status, Error, and Service Messages 8-33
PAPER JAM
DUPLEX
Media has misfed in the
duplex option.
Locate and remove the mis-
feed.
PAPER JAM
EXIT
Media has misfed in the fuser
area.
PAPER JAM
FUSER
PAPER JAM
TRANSFER
Media has misfed in the trans-
fer roller area. This type of
misfeed means that the media
did not make it to the paper
exit area.
PAPER JAM
TRAY 2
Media has misfed while being
pulled from Tray 2.
Locate and remove the mis-
feed.
PUT
"SIZE"
"TYPE"
IN TRAY 1
The size of paper being
printed on is different from the
size of paper specified in the
printer driver.
Load the correct paper on
Tray 1, and press the
ENTER key, then specify the
size and type of the paper.
PUT
“SIZE”
“TYPE”
IN TRAY 2
The paper size set from the
printer driver is different from
the size of paper loaded into
Tray 2.
 Open Tray 2 and keep
correct paper size. Then
close Tray 2.
 Specify the correct paper
size in the
MAIN MENU/
PAPER MENU/INPUT
TRAY/TRAY2/MEDIA
SIZE
menu.
TOP COVER
OPEN
The printer’s top cover is
open.
Close the top cover.
The imaging cartridge is not
installed.
Install the imaging cartridge.
A imaging cartridge incompati-
ble with the machine is
installed.
Replace the imaging car-
tridge with a correct one.
X TONER
LIFE END
The X toner cartridge has
reached the end of its life.
Replace the toner cartridge.
This
message...
means... do this...