Operation Manual

Configuration Menu Overview4-14
" All factory default values are shown in bold.
REPLACE
TONER
BLACK
Settings
YES/NO
If YES is selected, the carousel rotates to the black
toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 6-4.
CYAN
Settings
YES/NO
If YES is selected, the carousel rotates to the cyan
toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 6-4.
MAGENTA
Settings
YES/NO
If YES is selected, the carousel rotates to the
magenta toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 6-4.
YELLOW
Settings
YES/NO
If YES is selected, the carousel rotates to the yellow
toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 6-4.
REMOVE
ALL
Settings
YES/NO
If YES is selected, the printer enters REMOVE ALL
mode.
This mode is used when replacing all toner car-
tridges at the same time.
For details on replacing all toner cartridges, refer to
“Replacing All Toner Cartridges at the Same Time”
on page 6-10.
TONER
OUT
ACTION
Settings
STOP/CONTINUE
If STOP is selected, printing stops when the toner cartridge is
empty.
If CONTINUE is selected, printing continues even if the toner
cartridge is empty.