Operation Manual

Media Types 5-5
Envelopes
Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these lay-
ered regions may be lost or faded.
Use envelopes that are
 Common office envelopes approved for laser printing with diagonal joints,
sharp folds and edges, and ordinary gummed flaps
" Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
 Approved for laser printing
 Dry
DO NOT use envelopes that have
 Sticky flaps
 Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal-
ing
 Transparent windows
 Too rough of a surface
 Material that will melt, vaporize, offset, discolor, or emit dangerous fumes
 Been presealed
Capacity Tray 1 Up to 10 envelopes, depending on their
thickness
Tray 2 Not supported
Orientation Face up
Driver
Media Type
Envelope
Duplexing Not supported
Chapter05.fm Page 5 Wednesday, April 29, 2009 9:52 AM