Operation Manual

Operator panel > 28
TRAY
CONFIG
(c
ont.)
TRAY1
CO
NFIG
(cont.)
Y DOMENSION 148 MILLIMETER
~
279 MILLIMETER
~
297 MILLIMETER
~
356 MILLIMETER
Specifies paper length of custom paper as a
de
fault value.
Sets a paper size in the same direction as the
paper ru
n direction.
MEDIATYPE PLAIN
LETTERHEAD
BOND
RECYCLED
CARD STOCK
ROUGH
GLOSSY
USERTYPE1
USERTYPE2
USERTYPE3
USERTYPE4
USERTYPE5
Selects the type of media loaded in this tray.
This
will help the printer to adjust its internal
operating parameters, such as engine speed
and fusing temperature, to better
accommodate the media to be fed.
For example, letterhead may benefit from a
slightly lower fusing temperature to ensure
t
hat
its ink does not offset.
Note: USERTYPEn are displayed only if
register
ed in the host PC/Server.
MEDIAWEIGHT LIGHT
MEDIUM LIGHT
MEDIUM
HEAVY
ULTRA HEAVY1
Adjusts the printer for the weight of paper
st
ock loa
ded in this tray.
TRAY2
CO
NFIG
PAP
ERSIZE A4
A5
B5
LEGAL14
LEGAL13.5
LEGAL13
LETTER
EXECUTIVE
8.5“SQ
Folio
16K(184x260mm)
16K(195x270mm)
16K(197x273mm)
CUSTOM
Selects the size of paper loaded in Tray 2
(l
ower) if installed. For CUSTOM setting see X
DIMENSION and Y DIMENSION.
X DIMENSION 148 MILLIMETER
~
210 MILLIMETER
~
216 MILLIMETER
Specifies paper width of Custom paper as a
defaul
t value.
Sets a paper size at right angles to the paper
run direction.
ITEM SETTINGS EXPLANATION