Operation Manual

Operator panel > 31
STSTEM
ADJUST
(cont.)
TIMEOUT INJOB OFF
5 SEC
10 SEC
20 SEC
30 SEC
40 SEC
50 SEC
60 SEC
90 SEC
120 SEC
150 SEC
180 SEC
210 SEC
240 SEC
270 SEC
300 SEC
Specifies how many seconds the printer will
wait when received data pauses before forcing
a page eject.
In PostScript Emulation mode the job will be
canc
elled if timeout occurs.
TIMEOUT LOCAL 0 SEC
5 SEC
~
40 SEC
~
290 SEC
295 SEC
300 SEC
Sets how long each port is left opened after a
j
ob is
complete. (The network is excluded.)
TIMEOUT NET 0 SEC
5 SEC
~
90 SEC
~
290 SEC
295 SEC
300 SEC
Sets how long the network port is left opened
af
ter
a job is complete.
LOW TONER CONTINUE
STOP
Specifies whether the printer should continue
printin
g even after a low toner condition is
detected.
EMPTY COLOR TONER ALARM
CANCEL
Specifies the action when there is an empty
co
lor to
ner.
JAM RECOVERY ON
OFF
Specifies whether the printer should perform
j
am
recovery after a paper jam has occurred.
If ON, the printer will attempt to re-print any
page
s lost due to a paper jam once the jam
has been cleared.
ERROR REPORT ON
OFF
If ON,
the printer will print error details when
a P
ostScript Emulation error occurs.
Note: Applies tp PS & PCL XL only.
HEX DUMP EXECUTE Prints out data received from the host PC in
hexad
ecimal Dump.
Turning off the power supply switch restores
Normal Mode from HEX Dump Mode.
ITEM SETTINGS EXPLANATION