Operation Manual

Operator panel > 32
PRINT
ADJUST
POS
ITION
ADJUST
MP
TRAY
X
ADJUST
+2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
the direction perpendicular to the direction the
paper runs, that is horizontally, in 0.25 mm
increments.
Any parts of the print image that are outside
t
he pr
intable area as a result of this shift will
be cropped.
Y
AD
JUST
+2.0
0MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
the direction the paper runs, that is vertically,
in 0.25 mm increments.
Any parts of the print image that are outside
the pr
intable area as a result of this shift will
be cropped.
DUPLEX
X
ADJUST
+2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
the direction perpendicular to the direction the
paper runs, that is horizontally, in 0.25 mm
increments.
Any parts of the print image that are outside
t
he pr
intable area as a result of this shift will
be cropped.
DUPLEX
Y
ADJUST
+2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
the direction the paper runs, that is vertically,
in 0.25 mm increments.
Any parts of the print image that are outside
the pr
intable area as a result of this shift will
be cropped.
TRAY1 X
AD
JUST
+2.0
0MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
th
e direction perpendicular to the direction the
paper runs, that is horizontally, in 0.25 mm
increments.
Any parts of the print image that are outside
t
he pr
intable area as a result of this shift will
be cropped.
Y
AD
JUST
+2.0
0MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
t
he direction the paper runs, that is vertically,
in 0.25 mm increments.
Any parts of the print image that are outside
the pr
intable area as a result of this shift will
be cropped.
DUPLEX
X
ADJUST
+2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
the direction perpendicular to the direction the
paper runs, that is horizontally, in 0.25 mm
increments.
Any parts of the print image that are outside
t
he pr
intable area as a result of this shift will
be cropped.
DUPLEX
Y
ADJUST
+2.00MILLIMETER
~
0.00MILLIMETER
~
-2.00MILLIMETER
Adjusts the position of a whole print image in
t
he direction the paper runs, that is vertically,
in 0.25 mm increments.
Any parts of the print image that are outside
the printable area as a result of this shift will
be cropped.
ITEM SETTINGS EXPLANATION