Operation Manual

Operator panel > 41
PS S ETUP
COLOR
DENSITY
CYAN DENSITY -3~0~+3 Adjusts the density of each color
(cyan,magenta, yellow and black).
Normal setting is 0.
MAGENTA DENSITY -3~0~+3
YELLOW DENS
ITY -3~0~+3
BLACK
DENSITY -3~0~+3
ADJUST
REGSTRATION EXECUTE Performs automatic color registration
adjustme
nt.
Normally this is done on power on and when
outpu
t tray is opened and then closed.
This process accurately aligns the cyan, magenta
and yel
low images to the black image.
INK SIMULATION OFF
SWOP
ISO COATED
JAPAN
Selects from a range of industry standard color
sw
atc
hes.
Note: This function only applies to PS models
UCR LOW
MEDIUM
HIGH
Selects limitation of the toner layer thickness.
If paper curl occurs in dark printing, selecting
MEDIUM or
HIGH sometimes helps reduce curl.
CMY100% DENSITY ENABLE
DISABLE
When enabled, black areas are produced using
1
00%
C, M, and Y instead of black.
This results in a glossier finish.
CMYK CONVERSION ON
OFF
Setting to OFF wi
ll simplify the conversion
process of CMYK data, which will reduce the
processing time.
This setting is ignored when Ink Simulation
function i
s used.
Note: This function only applies to PS models
ITEM SETTINGS EXPLANATION
L1 TRAY TYPE1
TYPE2
TYPE1: The tray selection number for the level 1
operator begins with 1.
TYPE2: The number begins with 0.
NET P
S-PROTOCOL ASCII
RAW
Specifies a communication protocol mode for PS
data from
a network.
USB PS-PROTOCOL ASCII
RAW
Specifies a communication protocol mode for PS
data from
USB.
PDF PAPER SIZE CURRENT
TR
AY SI
ZE
SIZE IN PDF
FILE
SCALI
NG SIZE
Select the paper size of PDF Direct Print.
PDF SCALING SIZE 1%
~
99%
Specifies scaling size by percent when PDF Paper
Size is s
et to Scaling Size.
ITEM SETTINGS EXPLANATION