Operation Manual

Operator panel > 45
EPSON FX S ETUP
ITEM SETTINGS EXPLANATION
CHARACTER PITCH 10 CPI
12 CPI
17 CPI
20 CPI
PROPORTIONAL
Specifies character pitch in this emulation.
CHARACTER SET SET-2
SET-1
Specifies a character set.
SYMBOL SET IBM-437
(Default Symbol
Se
t only
shown)
Specifies a symbol set.
LETTER O STYLE ENABLE
DISABLE
Specifies the style that replaces 9BH with letter o
and
9DH w
ith a zero.
ZERO CHARACTER NORMAL
SLASHED
Sets the zero to be slashed or unslashed.
LINE PITCH 6 LPI
8 LPI
Specifies the line spacing.
WHITE PAGE SKIP ON
OFF
Selects whether blank pages are printed or not.
CR FUNCTION CR
CR+LF
Selects whether a received carriage return
c
haract
er (0Dh) also causes a line feed.
LINE LENGTH 80 COLUMN
136 COLUMN
Specifies the number of characters per line.
FORM LENGTH 11 INCH
11.7 INCH
12 INCH
Specifies the length of paper.
Note: The default setting varies depending on the
sa
les
area.
TOF POSITION 0.0 INCH
0.1 INCH
~
1.0 INCH
Specifies the distance of print from the top edge
of
the pa
per.
LEFT MARGIN 0.0 INCH
0.1 INCH
~
1.0 INCH
Specifies the distance of print from the left hand
ed
ge of the
paper.
FIT TO LETTER ENABLE
DISABLE
Sets the printing mode that can fit print data,
equivalent to 11 inches (66 lines), in the LETTER-
s
ize
printable area.
TEXT HEIGHT SAME
DIFF
Sets the height of a character.
SAME: Regardless of CPI, same height.
DIFF: As
CPI, character heights vary.