Operation Manual

Operator panel > 49
P RINT STATISTICS
This menu should only be changed by the System Administrators. In order to gain access
to this menu, follow the instructions in “How to change the settings - administrator” on
page 22, but hold down the MENU button inst
ead of the OK button. In this case, the
default password is 0000.
This menu is in ENGLISH only
.
A IR P RINT
ITEM SETTINGS EXPLANATION
ENTER PASSWORD nnnn Enters a password to enter PRINT STATISTICS
menu.
The default password is “0000.”
PRINT STATISTICS category is not shown when
Print Statistics function is not supported.
USAGE REPORT ENABLE/
DISABLE
Enables/Disables the printing of the Usage
Report.
When changing a setting value, the printer is
rebooted
.
MAINTENANCE CNT ENABLE/
DIS
ABL
E
Indication of frequency of consumable
exchange/non indication is set.
When Enable is set, also the maintenance
counte
r is indicated in together.
Conditions for display:
Enable must be selected in PRINT STATISTICS >
USAGE REPORT
.
RST MAIN CNT EXECUTE Resets the main counter.
RST SUPPLIES CNT EXECUTE Resets the number of replacement of
consu
mables.
CHANGE
P
ASSWORD
N
EW PASSWORD **** Sets a new password to enter PRINT
STATISTICS menu.
VERIFY PASSWORD **** Verifies the change
ITEM SETTINGS EXPLANATION
AirPrint ENABLE
DISABLE
Enable AirPrint function.
ENABLE is displayed only when AirPrint is
changed to Disabled by network error etc., select
Enable in this menu, network will be re-initialized,
and return to stand-by UI.
When AirPrint is e nabled, DISABLE will not be
displayed. Select ENABLE in this menu, just
return to stand-by UI. Network Re-initializing will
not be executed.
There is not a menu for changing AirPrint to
dis
able
.