Operation Manual

Using the printer software > 78
USB MENU
This menu controls the operation of the printer’s USB data
interface.
S YSTEM ADJUSTMENT MENU
This menu provides access to USB settings for your printer.
USB MENU
ITEM SETTINGS EXPLANATION
SOFTWARE RESET ENABLED /
DISABLED
Enables or disables the SOFT RESET
command. (Only available on Windows 98
and Windows Me.)
MAXIMUM SPEED 12MBPS
480MBPS
Specifies the maximum transfer speed.
SERIAL NUMBER ENABLED /
DISABLED
Specifies the USB serial number to
differentiate between USB devices
connected to the PC. If ENABLED, the
serial number is transmitted. If
DISABLED, the serial number is not
transmitted.
SYS ADJUST MENU
ITEM SETTINGS EXPLANATION
X ADJUST -2.00 ~ 0 ~ +2.00 Horizontal position.
Y ADJUST -2.00 ~ 0 ~ +2.00 Vertical position.
DUPLEX X ADJUST -2.00 ~ 0 ~ +2.00 Horizontal position.
DUPLEX Y ADJUST -2.00 ~ 0 ~ +2.00 Vertical position.
DRUM CLEANING ON
OFF
ON rotates the drum (without printing)
prior to printing to reduce any horizontal
white line effect on the print.
POWER SAVE ON
OFF
Enables or disables automatic power save
mode. Delay before entering this mode is
set in the system configuration menu.