Operation Manual
Table Of Contents
- Preface
- Emergency First Aid
- Manufacturer
- Importer to the EU/Authorised Representative
- Environmental Information
- Contents
- Notes, Cautions and Warnings
- Introduction
- Getting Started
- Configuring your machine....
- Menu Structure
- Operation
- Maintenance
- Troubleshooting
- Installing additional memory
- Colour Printing
- Specifications
- Index
- Oki contact details
Maintenance > 93
4. Carry out one of the following:
(a) If you are replacing a toner cartridge that has been
supplied with your printer (release lever has 3
positions), pull the coloured toner release lever on
the cartridge to be replaced towards the front of the
printer, in the direction of the arrow, but stop at the
central (upright) position.
(b) If you are replacing any other toner cartridge (lever
has 2 positions), pull the coloured toner release
lever (1) on the cartridge to be replaced fully
towards the front of the printer.
5. Lift the right-hand end of the cartridge and then draw the
cartridge to the right to release the left-hand end as
shown above, and withdraw the toner cartridge from the
printer.
1