Operation Manual
Table Of Contents
- Table of contents
- Before starting
- Setting Up
- Installation Requirements
- Checking the Accessories
- Unpacking and Installing the Machine
- Installing the Optional Equipment
- Connecting the Power Code
- Connecting a LAN Cable/USB Cable
- Loading Paper in the Tray
- Setting Up This Machine
- Connecting to a Wireless LAN (Only When the Wireless LAN Module is Mounted)
- Installing a Driver and Software to a Computer
- Basic Operations
- Maintenance
- Troubleshooting
- Operating Management/Specifications
- Contact Us
- 102 -
6. Troubleshooting
1
If paper is loaded on the MP tray, remove the paper.
2
Press the button (A) and open the output tray (a) completely.
3
Remove the four image drums from the machine and place the image drums
on a flat surface.
While removing consumables, be careful not to hit them to the LED head.
4
Cover the removed image drums with paper so that the image drums are not
exposed to light.
If the Error Code is "390"
Burns may result.
The fuser unit is extremely hot. Do not touch it.