Operation Manual
Table Of Contents
- Table of contents
- Before starting
- Setting Up
- Installation Requirements
- Checking the Accessories
- Unpacking and Installing the Machine
- Installing the Optional Equipment
- Connecting the Power Code
- Connecting a LAN Cable/USB Cable
- Loading Paper in the Tray
- Setting Up This Machine
- Connecting to a Wireless LAN (Only When the Wireless LAN Module is Mounted)
- Installing a Driver and Software to a Computer
- Basic Operations
- Maintenance
- Troubleshooting
- Operating Management/Specifications
- Contact Us
- 103 -
6. Troubleshooting
5
Open the transparent cover inside the machine, remove the jammed paper
slowly by pulling the edge of paper.
6
Put all four image drums back into the machine.
7
Close the output tray (a) slowly and push the center of the output tray for
confirmation.
8
When loading paper on the MP tray, load the paper with the print side face up.
Task is complete.