Operation Manual
Table Of Contents
- Table of contents
- Before starting
- Setting Up
- Installation Requirements
- Checking the Accessories
- Unpacking and Installing the Machine
- Installing the Optional Equipment
- Connecting the Power Code
- Connecting a LAN Cable/USB Cable
- Loading Paper in the Tray
- Setting Up This Machine
- Connecting to a Wireless LAN (Only When the Wireless LAN Module is Mounted)
- Installing a Driver and Software to a Computer
- Basic Operations
- Maintenance
- Troubleshooting
- Operating Management/Specifications
- Contact Us
- 105 -
6. Troubleshooting
5
Close the output tray (a) slowly and push the center of the output tray for
confirmation.
Task is complete.
Opening and closing the output tray starts printing.
1
Close the rear output tray.
2
Press the button (A) and open the output tray (a) completely.
3
Remove the four image drums from the machine and place the image drums
on a flat surface.
If the Error Code is "409"
Burns may result.
The fuser unit is extremely hot. Do not touch it.