Operation Manual
Table Of Contents
- Table of contents
- Before starting
- Setting Up
- Installation Requirements
- Checking the Accessories
- Unpacking and Installing the Machine
- Installing the Optional Equipment
- Connecting the Power Code
- Connecting a LAN Cable/USB Cable
- Loading Paper in the Tray
- Setting Up This Machine
- Connecting to a Wireless LAN (Only When the Wireless LAN Module is Mounted)
- Installing a Driver and Software to a Computer
- Basic Operations
- Maintenance
- Troubleshooting
- Operating Management/Specifications
- Contact Us
- 106 -
6. Troubleshooting
While removing consumables, be careful not to hit them to the LED head.
4
Cover the removed image drums with paper so that the image drums are not
exposed to light.
5
Remove the jammed paper slowly by pulling the edge of paper.
6
If paper jams in the fuser unit, press the jam release lever on the fuser unit and
slowly pull the jammed paper toward you.
7
Tilt back the lock levers on the both sides of the fuser unit toward you.