Operation Manual
Table Of Contents
- Table of contents
- Before starting
- Setting Up
- Installation Requirements
- Checking the Accessories
- Unpacking and Installing the Machine
- Installing the Optional Equipment
- Connecting the Power Code
- Connecting a LAN Cable/USB Cable
- Loading Paper in the Tray
- Setting Up This Machine
- Connecting to a Wireless LAN (Only When the Wireless LAN Module is Mounted)
- Installing a Driver and Software to a Computer
- Basic Operations
- Maintenance
- Troubleshooting
- Operating Management/Specifications
- Contact Us
- 125 -
7. Operating Management/Specifications
7
Press the or button to select value you want to set and press the
(ENTER) button.
8
Make sure that [*] is displayed on the left of the set time.
9
Press the (BACK) button to display the [Ready To Print] message.
1
Press the button to select [Setting] and press the (ENTER) button.
2
Press the button several times to select [Admin Setup] and press the
(ENTER) button.
3
Enter the administrator password, and then press the (ENTER) button.
The factory default password is "999999".
4
Press the button several times to select [Manage Unit] and press the
(ENTER) button.
5
Press the button several times to select [Power Save] and press the
(ENTER) button.
6
Press the button several times to select [Auto Power Off Time] and press
the (ENTER) button.
7
Press the or button to select time you want to set and press the
(ENTER) button.
8
Make sure that [*] is displayed on the left of the set time.
9
Press the (BACK) button to display the [Ready To Print] message.
Setting the Length of Idle Time Before Auto Power Off Works