Operation Manual
Table Of Contents
- Table of contents
- Before starting
- Setting Up
- Installation Requirements
- Checking the Accessories
- Unpacking and Installing the Machine
- Installing the Optional Equipment
- Connecting the Power Code
- Connecting a LAN Cable/USB Cable
- Loading Paper in the Tray
- Setting Up This Machine
- Connecting to a Wireless LAN (Only When the Wireless LAN Module is Mounted)
- Installing a Driver and Software to a Computer
- Basic Operations
- Maintenance
- Troubleshooting
- Operating Management/Specifications
- Contact Us
- 19 -
2. Setting Up
5
Pinch the tip of blue lever of the toner cartridge and turn forward until the tip
aligns on the lug of the cartridge.
Turn the levers of all 4 toner cartridges.
If you close the output tray without turning the blue lever, it may cause a malfunction. Be sure to turn the blue
lever until its top aligns on the lug in the back of the toner cartridge.
6
Pull the locking levers on the fuser unit toward you to unlock.
7
Hold the fuser unit handle and lift the fuser unit out of the machine.
8
Push the blue lever on the fuser unit and remove the orange safety stopper
and film.