Operation Manual
Table Of Contents
- Table of contents
- Before starting
- Setting Up
- Installation Requirements
- Checking the Accessories
- Unpacking and Installing the Machine
- Installing the Optional Equipment
- Connecting the Power Code
- Connecting a LAN Cable/USB Cable
- Loading Paper in the Tray
- Setting Up This Machine
- Connecting to a Wireless LAN (Only When the Wireless LAN Module is Mounted)
- Installing a Driver and Software to a Computer
- Basic Operations
- Maintenance
- Troubleshooting
- Operating Management/Specifications
- Contact Us
- 20 -
2. Setting Up
9
Hold the fuser unit handle and aligning the fuser unit to the grooves behind the
toner cartridges, place the fuser unit into the machine.
10
Push the levers on the fuser unit to lock.
11
Close the output tray (a) slowly and push the center of the output tray for
confirmation.
When the error message that the output tray is open does not disappear, make sure that the output tray is closed
securely.