Operation Manual
Table Of Contents
- Table of contents
- Before starting
- Setting Up
- Installation Requirements
- Checking the Accessories
- Unpacking and Installing the Machine
- Installing the Optional Equipment
- Connecting the Power Code
- Connecting a LAN Cable/USB Cable
- Loading Paper in the Tray
- Setting Up This Machine
- Connecting to a Wireless LAN (Only When the Wireless LAN Module is Mounted)
- Installing a Driver and Software to a Computer
- Basic Operations
- Maintenance
- Troubleshooting
- Operating Management/Specifications
- Contact Us

- 34 -
2. Setting Up
1
Press the button to select [Setting], and then press the (Enter) button.
2
Press the button to select [Admin Setup] and press the (Enter) button.
3
Enter the administrator password, and then press the (Enter) button.
The factory default administrator password is "999999".
4
Press the or button to select [User Install] and press the (Enter)
button.
5
Check that [Time Zone] is selected, and then press the (Enter) button.
6
Enter the setting value, and then press the (Enter) button.
7
Check that [*] is displayed on the left of the set value.
8
Press the (Back) button to go back to the [User Install] screen.
9
Press the or button to select [Time Setup] and press the (Enter)
button.
10
Press the or button to select [Manual Setup] and press the (Enter)
button.
11
Press the or button or use the numeric keypad to enter the month, day,
year and time, and then press the (Enter) button.
12
The setting values are updated.
13
Press the (Back) button to go back to the [Ready To Print] screen.
The factory default administrator password is "999999".
It is recommended to change the administrator password to enhance security. Set the
administrator password using from 6 to 12 alphanumeric characters.
Be careful not to forget the set password.
1
Press the button to select [Setting], and then press the (Enter) button.
2
Press the button to select [Admin Setup] and press the (Enter) button.
3
Enter the administrator password, and then press the (Enter) button.
The factory default administrator password is "999999".
4
Press the or button to select [Manage Unit] and press the (Enter)
button.
5
Press the or button to select [Admin Password] and press the
(Enter) button.
6
Enter a new password, and then press the (Enter) button.
7
Enter the password again to confirm, and then press the (Enter) button.
8
The setting value is updated and the screen returns to the [Admin Setup]
screen.
9
Press the (Back) button to go back to the [Ready To Print] screen.
Setting Date and Time Setting the Administrator Password