Operation Manual
Table Of Contents
- Table of contents
- Before starting
- Setting Up
- Installation Requirements
- Checking the Accessories
- Unpacking and Installing the Machine
- Installing the Optional Equipment
- Connecting the Power Code
- Connecting a LAN Cable/USB Cable
- Loading Paper in the Tray
- Setting Up This Machine
- Connecting to a Wireless LAN (Only When the Wireless LAN Module is Mounted)
- Installing a Driver and Software to a Computer
- Basic Operations
- Maintenance
- Troubleshooting
- Operating Management/Specifications
- Contact Us
- 44 -
2. Setting Up
7
Press the button to select [Wireless(AP Mode) Setting] and press the
(Enter) button.
The [It is not possible to use the Wireless(AP Mode) at the same time.] message is
displayed for approximately five seconds.
8
Select [Enable] and then press the (Enter) button.
9
Press the button to select [Manual Setup] and press the (Enter) button.
10
Check the [SSID] and [Password] of the machine.
11
Enter the [SSID] and [Password] that you checked in step 10 to connect the
machine and your wireless device.