Operation Manual
Table Of Contents
- Table of contents
- Before starting
- Setting Up
- Installation Requirements
- Checking the Accessories
- Unpacking and Installing the Machine
- Installing the Optional Equipment
- Connecting the Power Code
- Connecting a LAN Cable/USB Cable
- Loading Paper in the Tray
- Setting Up This Machine
- Connecting to a Wireless LAN (Only When the Wireless LAN Module is Mounted)
- Installing a Driver and Software to a Computer
- Basic Operations
- Maintenance
- Troubleshooting
- Operating Management/Specifications
- Contact Us
- 63 -
3. Basic Operations
• Do not press down the paper or hold the paper to pull while printing on the paper fed from the MP tray. To stop
printing, open the output tray.
For instructions on how to remove paper, see "If Paper Jams Occur".
• If you open and close the MP tray vigorously, the paper feed roller of MP tray may fall and get in the way of loading
paper. If the paper feed roller of MP tray has fallen, raise the paper feed roller of MP tray before loading paper.
1
Open the MP tray forward by inserting your finger into the front recess.
2
Pull out the paper support by holding the center part of it.
3
Open the sub support.
4
Adjust the manual feeding paper guide to the width of paper to be loaded.
5
Make sure that the paper feed roller stays in the proper position.
If the paper feed roller has fallen, push it upward and fix it.
Loading Paper in the MP Tray