Operation Manual
Table Of Contents
- Table of contents
- Before starting
- Setting Up
- Installation Requirements
- Checking the Accessories
- Unpacking and Installing the Machine
- Installing the Optional Equipment
- Connecting the Power Code
- Connecting a LAN Cable/USB Cable
- Loading Paper in the Tray
- Setting Up This Machine
- Connecting to a Wireless LAN (Only When the Wireless LAN Module is Mounted)
- Installing a Driver and Software to a Computer
- Basic Operations
- Maintenance
- Troubleshooting
- Operating Management/Specifications
- Contact Us
- 84 -
5. Maintenance
3
Identify an empty toner cartridge by its label color.
4
Pinch the tip of blue lever (b) of the toner cartridge and turn it toward you until
the tip aligns on the lug of the cartridge.
5
Lift the toner cartridge (c) from right side, and remove it from the machine.
While removing consumables, be careful not to hit them to the LED head.
6
Unpack a new toner cartridge.
7
Shake the cartridge several times vertically and horizontally.
8
Remove the tape (d) from the toner cartridge.
9
Insert a new toner cartridge (c) by aligning its left side indentation (e) with the
protrusion (f) on the image drum so the toner cartridge and image drum color
labels align. Then insert the right side gently into place.
Burns may result.
Never throw used toner cartridges into a fire. They may explode, and the toner inside
may fly off and cause burns.