Operation Manual
Table Of Contents
- Table of contents
- Before starting
- Setting Up
- Installation Requirements
- Checking the Accessories
- Unpacking and Installing the Machine
- Installing the Optional Equipment
- Connecting the Power Code
- Connecting a LAN Cable/USB Cable
- Loading Paper in the Tray
- Setting Up This Machine
- Connecting to a Wireless LAN (Only When the Wireless LAN Module is Mounted)
- Installing a Driver and Software to a Computer
- Basic Operations
- Maintenance
- Troubleshooting
- Operating Management/Specifications
- Contact Us
- 90 -
5. Maintenance
While removing consumables, be careful not to hit them to the LED head.
5
Unpack a new image drum and place it on the flat surface.
6
Remove the desiccant pack.
7
Remove the toner cover.
8
Unpack a new toner cartridge.
9
Shake the cartridge several times vertically and horizontally.
10
Remove the tape (c) from the toner cartridge.
Burns may result.
Never throw a used image drum or toner cartridge into a fire. They may explode, and
the toner inside may fly off and cause burns.